Ortur Laser Master 2 Pro S2 Laser Engraver Cutter Kit

Ortur Laser Master 2 Pro S2 Laser Engraver Cutter Kit

Main Features:

• More Powerful Engraving with True 10W Output Power - ORTUR Laser Master 2 Pro S2 LU2-10A is newly upgraded with a 10W laser module, which makes the cutting speed up to 15,000 mm/min. The compressed point is 0.05mm x 0.1mm. Engraving area is 400*400mm. The optical power reaches to 10W. It can cut 30mm acrylic and 20mm wood. At the same time, the laser module of the engraving machine has a built-in air-assist interface, which is designed for cutting.
• The Safest Machine in Diode Laser Engraving Series:When the machine is displaced or tilted, or computer crashes during the engraving process, or motors stop moving, the laser will automatically stop to prevent any possible damage. Any flame detected, the alarm will buzz and flash. Furthermore, an Emergency Stop Button is added to make sure it can be stopped manually when necessary.
• Upgraded Laser Module: No need to adjust the focus before engraving. The focusing spot area of the new laser is only 1/3 of other ordinary lasers and Integrated Air Assist/ Dual Fans/Foldable Focal Gauge/ All in 235g Weight . Combine precision engraving and high energy cutting at the same time. It can work very well at high speed of 15000mm/mm, save you half time than other similar brands.
• Most Professional Engraving and Cutting Options:Both SF and LF can do engraving and cutting!The focus of the SF laser is smaller, the image is finer, and it is more suitable for engraving.LF has a longer depth of field with bigger power density. and it is more suitable for cutting.The max. thickness is 20mm plywood (equipped with LF nozzle, the cutting surface is smooth and there will be no black edges). Buyers only to order air compressor by yourself for LU2-4 LF laser mould.
• Super High Power: ORTUR's first real 10W optical power laser engraver. The laser output power soars up with the latest generation of two 5.5W laser coupling technology, is able to cut off 12-15mm thick plywood as well as the 12mm thick black acrylic board with only one pass, and even cut the 30mm thick black acrylics without any issues.
• Three Times Faster Than Average:Ortur Laser 1.5 series firmware, increasing the maximum speed from 4000mm/min to 10000mm/min. Besides, compared with the traditional USB to serial port has only 921,600, the MCU native USB CDC interface suport a baud rate as high as 2,000,000, greatly shorten the engraving time.
• Ultimate Engraving Experience with higher precision:Due to the use of 12bit precision PWM control signal, more than 1000 grayscale performances give you real photo-like details.
• 24-hour Stable and Consistent Engraving:24V electric system in motherboard supports powerful laser module and more add-ons. high-quality flexible cables and wire-protecting chains ensure 24 hours uninterrupted operation and consistent engraving result.
• Latest Laser Beam Compressed Focal Spot Technology: Ortur Laser Master 2 pro S2 adopt the latest 5.5W higly compressed focal spot laser modulediode, it has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, can cut up to 12mm thick wood, 10mm acrylic, carve ceramics and stainless steel.
• Fast Focusing Design: Combines a fixed focus lens and a sliding design. You only need to slide the laser and tighten the screws to complete the focusing. This makes it very easy to use.
• Solid & Easy Assembly Structure: The full-metal structure design makes the machine work stably, and improves the engraving accuracy. The assembly can be completed in 10-20 minutes. The structural frame is very durable and available to upgrade. During use,
• Wide Compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Apple system (LightBurn), and engraving file format Support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc.
• New Eye Protection Design: The laser filter cover filters 98% of the ultraviolet light to the eyes and prevents animals grabing the laser spot.
• Square measuring ruler:X-axis and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly. The 400x400mm large-area engraving interval can meet your various engraving needs.

Safety precautions:

• Please wear goggles when operating the laser engraver. Wear safety goggles to avoid blindness.
• Please do not touch the laser emitter with your hand, or it may burn your hand.
• Please avoid strong impact on the machine.
• Children under 14 are not allowed to use this product and children over 14 need adult supervision.
• The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
• This product is not recommended for industrial cutting due to its high engraving speed.