Phrozen Sonic XL 4K 2022 LCD 3D Printer

Phrozen Sonic XL 4K 2022 LCD Resin 3D Printer

With a large-sized building plate, the Sonic XL 4K 2022 allows you to print enormous quantities of precise dental models in no time. This dental 3D printer comes with the dental 3D printing slicer software, Dental Synergy Slicer, which has simplified the dental workflow with its easy-to-use interface. That’s not all. The Sonic 4K 2022 is also equipped with a heater and air purifier system to enhance your entire 3D printing experience and reduce 3D printing failures.   

Main Features:

• Adjustable light intensity to boost print efficiency.
• Add-on heater for high-quality, stable 3D prints.
• No need to print from scratch after a power outage.
• Equipped with an air purifier to clear up resin fumes.
• Specialized door buffer to increase printer lifespan.

Water-Washable Dental Model Resin

Phrozen Water-Washable Dental Model Resin has been specifically developed to rapidly produce highly accurate 3D printed dental models.

• 【Remove Residue with Ease】Phrozen Water-Washable Resin is designed to be easily rinsed by water which means that you no longer need any ethanol and IPA to clean up your resin 3D prints.
• 【High Accuracy】With a Medit intraoral scanner, more than 90% of variation falls within ±0.05mm on dental 3D models created by Water-Washable Dental Model Resin.
• 【Low Shrinkage & High Precision】With low deformation or shrinkage, this resin is ideal to create a perfect match between dental models with removable dies; ensuring that no printed parts ever change in shape.
• 【Low Viscosity】Phrozen Water-Washable Dental Model Resin is easy to print with and can be post-processed easily thanks to its low viscosity levels.
• 【Low Odor】Say bye-bye pungent smells as Phrozen Water-Washable Dental Model Resin won’t make your place reek of resin fumes.

Phrozen Sonic XL 4K 2022 Specification:

• System: Phrozen OS
• Operation: 5in Touch Panel
• Slicer Software: Phrozen Dental Synergy Slicer
• Connectivity: USB   | Ethernet | WIFI
• Technology: Resin 3D Printer - LCD Type
• Light Source: 405nm ParaLED Matrix 3.0
• XY Resolution: 52µm
• Layer Thickness: 0.01-0.30mm
• Printing Speed: 90mm/ hour
• Power Requirement: AC100-240V~50/60Hz
• Printer Size: L29x W33 x H47 cm
• Print Volume: L20 x W12.5 x H20 cm
• Printer Weight: 17.2kg

Water-Washable Dental Model Resin

• Weight: 1KG per bottle
• Flexural Strength: >1875 MPa
• Flexural Modulus: 3.04 KJ/m2
• Hardness: >75 Shore D
• Viscosity: 0.771 Pa·s

Precautions for Resins:

• Way to Rinse: Clean with alcohol spray with an air gun. DO NOT immerse the model into alcohol for a long time.
• Use and preserve resins at room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during the operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.
• After receiving your Phrozen resins, we strongly recommend you finish them as soon as possible as unopened resins only have a shelf life of one year.