Phrozen Sonic XL 4K Plus LCD 3D Printer

Phrozen Sonic XL 4K Plus LCD Resin 3D Printer

Released in 2023, Sonic XL 4K Plus features a new mainboard system and substantial enhancement in build quality, providing more robust operation to withstand the demands of large batch high-precision dental 3D printing.

Main Features:

• Print up to 8 full-arch models in ±35 minutes
• 52 micron XY resolution
• New mainboard system & Improved heating technology
• Built-in air purifier
• Wide materials compatibility with validated resin settings

Technical Specs:

• Technology: LCD
• LCD Specification: 9.3” 4K Mono-LCD
• Light Source: 405nm ParaLED® 3.0 Module
• Z-Axis: Dual Linear Rails (Ball Screws)
• Printer Size: 33 x 29 x 47 cm
• Printer Weight: 17.2 kg
• Printing Volume: 19.66 x 12.03 x 20 cm
• XY Resolution: 52 µm
• Layer Thickness: 0.01-0.30 mm
• Max. Printing Speed: Up to 90mm/hr
• System: Phrozen OS
• Operation: 5in Touch Panel
• Slicer Software: Phrozen DS Slicer
• Connectivity: USB | Ethernet | WiFi
• Compatible File Format: .PRZ
• Power Requirement: AC100-240V : 50-60HZ
• Power Supply: 180W
• Cooling System: SIngle Cooling Fan
• Other System: Air Purifier | Heater

Precautions for Resins:

• Way to Rinse: Clean with alcohol spray with an air gun. DO NOT immerse the model into alcohol for a long time.
• Use and preserve resins at room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during the operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.
• After receiving your Phrozen resins, we strongly recommend you finish them as soon as possible as unopened resins only have a shelf life of one year.